Open the stapler. Hold the base of the stapler firmly in one hand, then pull back the top of the stapler where the staple tray is. Other stapler models include a silver tab on the bottom of the stapler , toward the back. Press it, and the stapler will automatically pop open , enabling you to use it for tacking purposes.
Likewise, why does my stapler keep jamming? Cheap staples that are made of thin, softer wire and have blunt points are most likely to bend, crumple and fail to penetrate the layers of paper.
Causing the stapler to move or apply pressure at an angle, instead of punching the staple straight into and through the paper, also causes crumpling and jamming. Most stapler problems are caused by rough use, such as slamming the top of the stapler down with your palm instead of gripping both sides of the stapler carefully as you press down gently. If you need to fix a stapler the process is usually simple, but in some cases it could be damaged beyond a basic repair.
Stick the paperclip into the head of the stapler from the outside if you can't get the top open. See if you can remove the jammed staple by pulling it down. Insert the flat end of a flat-head screwdriver into the mouth of the stapler if you can't get the top part of the stapler open. Why do staplers have two settings on the base plate for the direction in which the staple bends? The other setting , the one that splays the staple points outward, is for temporarily attaching papers that are intended to be separated again.
Steps Hold the stapler's base in place. Hold the stapler against a flat surface, such as a table. Pull the plastic top up to expose the stapler tray. On a top load stapler, you'll see the metal staple tray set inside the plastic.
Place new staples legs-down in the tray. Lower the stapler head to close it. Electronic Heavy - Duty Staplers Once you have found it, pull the feed tray out with your fingers. Locate the cartridge inside the feed tray and pull it out. Insert your refill staples into the cartridge.
Add as many staples as you need to fill the cartridge and slide the cartridge back into the body of the stapler. Swingline Optima 40 Heavy Duty Stapler. Swingline Stapler Red It is essential that you use your staple gun on just your work surface, and nothing else. Place a sleeve of heavy duty staples into the carrying tray, prongs facing downward.
On most Bostitch models, a visual aid will be printed on or near the tray to help with loading. Replace the follow block in its cradle and depress the top of it until the spring begins to compress. To refill most standard or mini stapler , lift the top and place a stick or row of joined staples in the tray.
Lift up and then push in the thin metal latch located on the black staple-holding box. As you do this, the staple box will be unlocked and will release toward you. Insert heavy-duty staples into the staple holder, pushing back on the spring that feeds the staples forward until the staples are loaded. Gently let go of the spring. Kallie Johnson began her writing career in , contributing to various online publications.
She enjoys writing home and garden topics and considers herself an expert on do-it-yourself home improvement topics. By Kallie Johnson Updated July 21,
0コメント